#! /bin/sh
# Common stub for a few missing GNU programs while installing.
scriptversion=2012-01-06.18; # UTC
# Copyright (C) 1996-2012 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
echo 1>&2 "Try '$0 --help' for more information"
exit 1
fi
run=:
sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, 'missing' is being run in the
# srcdir already.
if test -f configure.ac; then
configure_ac=configure.ac
else
configure_ac=configure.in
fi
msg="missing on your system"
case $1 in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
shift
"$@" && exit 0
# Exit code 63 means version mismatch. This often happens
# when the user try to use an ancient version of a tool on
# a file that requires a minimum version. In this case we
# we should proceed has if the program had been absent, or
# if --run hadn't been passed.
if test $? = 63; then
run=:
msg="probably too old"
fi
;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Handle 'PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
error status if there is no known handling for PROGRAM.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
--run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
aclocal touch file 'aclocal.m4'
autoconf touch file 'configure'
autoheader touch file 'config.h.in'
autom4te touch the output file, or create a stub one
automake touch all 'Makefile.in' files
bison create 'y.tab.[ch]', if possible, from existing .[ch]
flex create 'lex.yy.c', if possible, from existing .c
help2man touch the output file
lex create 'lex.yy.c', if possible, from existing .c
makeinfo touch the output file
yacc create 'y.tab.[ch]', if possible, from existing .[ch]
Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
'g' are ignored when checking the name.
Send bug reports to <bug-automake@gnu.org>."
exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing $scriptversion (GNU Automake)"
exit $?
;;
-*)
echo 1>&2 "$0: Unknown '$1' option"
echo 1>&2 "Try '$0 --help' for more information"
exit 1
;;
esac
# normalize program name to check for.
program=`echo "$1" | sed '
s/^gnu-//; t
s/^gnu//; t
s/^g//; t'`
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
# the program). This is about non-GNU programs, so use $1 not
# $program.
case $1 in
lex*|yacc*)
# Not GNU programs, they don't have --version.
;;
*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
# Could not run --version or --help. This is probably someone
# running '$TOOL --version' or '$TOOL --help' to check whether
# $TOOL exists and not knowing $TOOL uses missing.
exit 1
fi
;;
esac
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case $program in
aclocal*)
echo 1>&2 "\
WARNING: '$1' is $msg. You should only need it if
you modified 'acinclude.m4' or '${configure_ac}'. You might want
to install the Automake and Perl packages. Grab them from
any GNU archive site."
touch aclocal.m4
;;
autoconf*)
echo 1>&2 "\
WARNING: '$1' is $msg. You should only need it if
you modified '${configure_ac}'. You might want to install the
Autoconf and GNU m4 packages. Grab them from any GNU
archive site."
touch configure
;;
autoheader*)
echo 1>&2 "\
WARNING: '$1' is $msg. You should only need it if
you modified 'acconfig.h' or '${configure_ac}'. You might want
to install the Autoconf and GNU m4 packages. Grab them
from any GNU archive site."
files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
case $f in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
esac
done
touch $touch_files
;;
automake*)
echo 1>&2 "\
WARNING: '$1' is $msg. You should only need it if
you modified 'Makefile.am', 'acinclude.m4' or '${configure_ac}'.
You might want to install the Automake and Perl packages.
Grab them from any GNU archive site."
find . -type f -name Makefile.am -print |
sed 's/\.am$/.in/' |
while read f; do touch "$f"; done
;;
autom4te*)
echo 1>&2 "\
WARNING: '$1' is needed, but is $msg.
You might have modified some files without having the
proper tools for further handling them.
You can get '$1' as part of Autoconf from any GNU
archive site."
file=`echo "$*" | sed -n "$sed_output"`
test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
echo "#! /bin/sh"
echo "# Created by GNU Automake missing as a replacement of"
echo "# $ $@"
echo "exit 0"
chmod +x $file
exit 1
fi
;;
bison*|yacc*)
echo 1>&2 "\
WARNING: '$1' $msg. You should only need it if
you modified a '.y' file. You may need the Bison package
in order for those modifications to take effect. You can get
Bison from any GNU archive site."
rm -f y.tab.c y.tab.h
if test $# -ne 1; then
eval LASTARG=\${$#}
case $LASTARG in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
if test ! -f y.tab.h; then
echo >y.tab.h
fi
if test ! -f y.tab.c; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
lex*|flex*)
echo 1>&2 "\
WARNING: '$1' is $msg. You should only need it if
you modified a '.l' file. You may need the Flex package
in order for those modifications to take effect. You can get
Flex from any GNU archive site."
rm -f lex.yy.c
if test $# -ne 1; then
eval LASTARG=\${$#}
case $LASTARG in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
if test -f "$SRCFILE"; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
if test ! -f lex.yy.c; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
help2man*)
echo 1>&2 "\
WARNING: '$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
Help2man package in order for those modifications to take
effect. You can get Help2man from any GNU archive site."
file=`echo "$*" | sed -n "$sed_output"`
test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
exit $?
fi
;;
makeinfo*)
echo 1>&2 "\
WARNING: '$1' is $msg. You should only need it if
you modified a '.texi' or '.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy 'make' (AIX,
DU, IRIX). You might want to install the Texinfo package or
the GNU make package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
file=`echo "$*" | sed -n "$sed_output"`
test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -z "$file"; then
# ... or it is the one specified with @setfilename ...
infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
file=`sed -n '
/^@setfilename/{
s/.* \([^ ]*\) *$/\1/
p
q
}' $infile`
# ... or it is derived from the source name (dir/f.texi becomes f.info)
test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
# If the file does not exist, the user really needs makeinfo;
# let's fail without touching anything.
test -f $file || exit 1
touch $file
;;
*)
echo 1>&2 "\
WARNING: '$1' is needed, and is $msg.
You might have modified some files without having the
proper tools for further handling them. Check the 'README' file,
it often tells you about the needed prerequisites for installing
this package. You may also peek at any GNU archive site, in case
some other package would contain this missing '$1' program."
exit 1
;;
esac
exit 0
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End: